模具加工合同4篇 精准合同，完美成型：模具加工合同的要素解析
本文介绍了模具加工合同的基本内容，包括甲方与乙方的权利义务、技术要求、交货时间、质量标准、价格等方面的规定。此外，文章还提供了一些签订模具加工合同需要注意的事项和步骤。
第1篇
the sale of the friendly negotiation of both parties, the buyer seller commissioned processing production ________ mould co ______ set. the two sides reached the following processing agreement
product name serial number part name point number (mold type) mold single price (rmb yuan) delivery condition
1. the buyer is responsible for the delivery of the r & d requirements and plans of the seller's project, and provides the sales forecast as far as possible.
2. the buyer is responsible for the delivery of the product design drawings and other related technical information required by the seller to the seller and the technical support.
3., the buyer has the sole right to interpret the product design drawings and related technical data delivered to the seller. when there is ambiguity, the seller shall consult the buyer's opinion and confirm it by the buyer.
4. after the seller completes the design and manufacture of the mould, the buyer will go to the seller's site to verify the mold, or to provide the product sample to the buyer for confirmation and confirmation by the seller. the moulds referred to in this contract include the mould of the product itself and the fixture and mould needed for the subsequent production.
1. the seller is responsible for the design and manufacture of the moulds according to the product design drawings and other related technical information provided by the buyer.
be responsible for completing the mold according to the buyer's design requirements in accordance with the stipulations of the contract.
2. the seller shall be responsible for providing timely certification and sample test, trial production of desired products. at the same time the seller must provide the details of the related products.
the detailed test report is for the buyer's confirmation. in case of repair / modification, the test report is also attached at the same time.
1.5 the seller shall give the buyer the corresponding compensation in the form of the buyer's approval as the seller causes the buyer to spend the labor and cost outside the normal technical support as a result of the seller's cause.
2.1 the seller after the receipt of the buyer after the confirmation of product drawing, which began to enter the mold design and production stage, open cycle for ________ days
2.2 due to buyer's cause the delay of mold making progress is not calculated.
2.3 if the seller's mold making process and other mistakes lead to the failure of the mold to be accepted and the buyer is in urgent need of production.
at the same time, the production should be arranged with the existing mold, and the die should be reopened according to the requirements of the drawings and samples.
3.1 separate settlement: monthly knot, 60 days after the opening of the ticket, open 17% vat invoices.
3.1.1 of the total amount of the contract manufacturing batch mould (including vat) for rmb _________ yuan (rmb ________ yuan), the buyer to pay the total amount of _____% mold, mold ___% residual cost allocation in the first 50k products, if the number of orders less than 50k, the buyer shall supply the seller after the unamortized tooling cost.
3.1.2 from the two sides after the signing of the contract, the seller to provide value-added tax invoices (mold total ____%), the buyer within twenty working days of payment.
4. product order: only after the quality acceptance of the product sample is qualified and the buyer's written confirmation, the seller may accept the order of the third party authorized by the buyer or the buyer. the order contract signed by third parties authorized by the buyer with the buyer's seller is subject to this contract.
after the seller has completed the mold, the seller agrees to guarantee the quality of the product in accordance with the buyer's quality standard (the first confirmation report).
the buyer reserves the right to modify the content of the quality standard in accordance with the actual needs.
1. the ownership of all moulds and clamping fixtures and their assembly drawings and parts drawings (including 2d and 3d) involved in the contract shall be owned by the buyer, and the seller shall not interfere with the buyer's disposition of the molds. if the seller is responsible for the custody of the seller, the seller shall not supply the mould to the third party without the buyer's consent, otherwise the buyer shall have the right to ask the seller to return the mold fee and compensate for the loss.
2. when the buyer pays the mold cost, the seller must cooperate with the buyer or the third party designated by the buyer to transfer the inspection and accept the replacement of the die from the seller's place, and will replace the worn parts at the expense of itself, so as to ensure the restart of production. the seller is obliged to assemble, rust and pack the moulds and send it to the place designated by the buyer. all mold assembly drawings and part drawings (including 2d and 3d) and all clamping devices must be transferred to the buyer at the same time.
3., during the process of mold transfer, such as the improper assembly, rust prevention or packaging of the seller, it will cause damage to the mold, and all direct and indirect losses arising therefrom shall be borne by the seller.
1., the seller guarantees the service life of the mould 500 thousand times, and the seller is responsible for free maintenance during this period. if the mold is not used during the service life, the seller shall be responsible for changing or re opening the mold and taking the corresponding cost.
2. the seller should die changes, maintenance and repairs in a timely manner and register, whether such a modification, maintenance and repair are
the buyer made it. if the buyer is to ask the relevant technical details or evidence, the buyer may register with the time without notice. the seller shall give the buyer a copy of the record once every three months. the seller should take the initiative to complete this task on a regular basis without the buyer's request.
the product and the buyer 1. involved in this contract to provide design drawings and other information in the intellectual property is owned by the buyer, the buyer without permission, the seller shall not disclose to any company or individual, otherwise all the losses resulting from the seller; the buyer only agreed to all data and information provided by the seller by the buyer the purpose of this contract based on the,
2. the seller agrees to the design drawings will not be provided by the buyer and other data or information for the purpose of non contract other than the seller or the buyer has the right to pursue responsibility; without written permission from the buyer, the seller shall not in publications, advertising or other written and oral form to the seller to provide or have provided any data and information.
3., without the buyer's license, it is strictly prohibited for the seller to use this mould to supply other customers other than the buyer or the buyer's designated customer, otherwise all direct and indirect losses arising from it shall be the seller's responsibility.
4. other undisclosed matters of confidentiality are carried out in accordance with the "confidentiality agreement" signed by the buyer and the seller.
1. the seller shall be liable for breach of contract if the seller fails to complete the mold making and sample delivery according to the progress of each stage specified in the 2.1. the seller shall pay the buyer a fine of 2% of the total amount of this contract at a time of one day of delay. the amount of the penalty is not more than the total amount of the contract.
2., if the seller's cause causes the seller's quality to be supplied to the buyer can't meet the buyer's requirements, and the other materials will be lost and scrapped during the assembly process, the seller will fully compensate for the loss and scrap materials and the resulting artificial / stop line costs. the two parties may sign separately the raw material for production.
3. the quality and progress of the product provided to the buyer by the seller for the seller's cause can not reach the buyer.
3. when the mold is certified by the buyer, the seller is responsible for the seal of the mold. if the buyer agrees that the seller is responsible for the subsequent processing and production of the products, the seller shall be responsible for the repair and maintenance of the moulds, and the seller shall make the batch production according to the order of the third party authorized by the buyer or the buyer.
4. for all the molds produced by the buyer, the seller shall provide the buyer with detailed design drawings. all drawings must be made in autocad or pro-eng (pro-el2) and must be transmitted to the buyer in electronic form before the mold opening for approval.
1. repair and maintenance of the mold: the seller is responsible for the repair and maintenance of the mold during the production process.
2., after no dispute between the two sides, the buyer will provide the product design drawings and related technical information to the seller, and send the engineer to the seller's technical exchange or the seller send the engineer to the buyer for technical communication. the product drawings and technical requirements list is attached to annex 1.
3. the seller promised to use the quality requirements of the mold for the system to produce products to the buyer
4. the seller promised to use the mold for the system to produce the product can reach the seller's delivery capacity:
5. the seller promises that all the moulds involved in this contract can be reached to 400 thousand times.
6., without the buyer's permission, it is strictly prohibited for the seller to contract the whole part of the contract involved in the contract to other companies for processing. otherwise, the seller shall be liable for breach of contract in accordance with the breach clause of the contract as a breach of contract.
1.1 after negotiation between the two parties, the seller will provide the final offer of the mould approved by the buyer and sign the price confirmation as an indispensable part of the contract.
the total amount of 1.2 contract (including vat mold ____%) rmb_______.
1.3 the total cost of the price of the mold contains the following expenses, and the seller shall not ask the buyer for the following reasons:
1.3.1 the cost of all the fixtures and tools required by the seller for the molding / two processing / assembly of the product;
1.3.2 the seller, according to the contract, carries out the cost of material, equipment and manpower for mould design, test mould.
1.3.3 the cost of the sample (800 sets) provided by the seller to the buyer for the certification of the mold and product;
1.3.4 the seller is the cost of the die vulnerable spare parts to ensure the normal production of the mold;
1.3.5 the cost of the related tools and tools for other processes that are prepared for the normal production of the product.
1.4 when the written request of the buyer the seller according to the change of the product design for the mould modification, if the mould modification is relatively simple, including less mold material changes and other simple changes from the mold, the seller to the buyer without charges; if the modification is complex, great influence on the whole structure of the mold, then the seller according to the modified working hours for mold to the buyer by the buyer offer, the corresponding mold modification cost. the buyer shall not bear any responsibility for the repair or modification of the mold due to the seller's reason, due to the failure of the mold to meet the buyer's requirements.
1.5 by the seller to the buyer's manual and cost technical support from the normal cost, the seller shall give the buyer recognized the way the corresponding compensation.
2.1 after the seller has received the product drawing file after the buyer's confirmation, that is,
the cost of artificial / stop line formation. the two parties may sign separately the raw material for production.
3. if the seller has caused the seller to the buyer of the product quality and schedule is not up to the requirements of the buyer, the buyer and customer missed the best time to market, or the buyer was forced to cancel the project, so that the buyer and its customers suffer serious losses and loss of material research, in addition to the seller to refund all previous the buyer to pay the purchase price, depending on the actual situation of the seller also bear the buyer direct and indirect economic losses.
4., if the seller is unable to resist force, including the war, fire, strike, and other force majeure caused by chinese law, the buyer will allow the buyer to dismiss it. the seller shall notify the buyer in written form within 24 hours after the occurrence of the force majeure, and the seller is obliged to take all necessary measures to deliver the goods as soon as possible. if the force majeure continues for more than 2 weeks, the buyer has the right to cancel this contract.
5. other unfinished matters: implemented in accordance with the economic contract law.
any dispute arising from the execution of this contract shall be settled through friendly negotiation first. if no negotiation can be reached within 30 days, either party can submit the dispute to the municipal court.
the parties to this contract shall be strictly enforced. if one party fails to perform the contract in the cause of the contract, the party must ask for the consent of the other party two weeks in advance, and the contract shall be terminated.
第2篇
台州时达水暖制造有限公司（简称甲方）因生产发展需要，委托 （简称乙方）制造塑料模具 副，经双方友好协商达成如下协议：
4、 按国家相关的模具技术要求设计加工模具，注塑件无飞边、毛刺。收缩等缺陷；
7、 其它要求按照甲方图纸所列的技术要求达到标准。
1、 模具质保期内，乙方负责模具的修理，原则上修模地点在甲方，如遇甲方加工设备等原因无法在甲方
完成修理的，可以送回到乙方修理，相关费用由乙方负责；
2、 由于甲方使用不当或甲方需要改动引旨起的模具修改，乙方酌情收取成本费，不计劳务费。
1、合同正式签订之后首付定金（预付款）为总额的 %，即 元整； 2、模具交货验收合格后再付总额的 %，即 元整； 3、余款在模具交货验收合格后 天内付清。
1、 如乙方准时按质量完成模具加工，甲方应按时支付给乙方相应的模具款，如未按时支付（非人为因素
除外）模具款，甲方应支付迟纳金或延期模具总价的 %。
2、 乙方应按时按质地完成模具的加工及相关的修理，如乙方不能按时交模，则每延迟交模时间（含试模
合格的时间）一天甲方将从应付予乙方的模具款中扣除1000元以示惩罚，如果延迟交模时间超过1个月，甲方就不再接收此模具，并有权收回此模具之全部已付款，乙方同时须向甲方缴纳相当于此模具制造价格1倍的违约金，并承担甲方由此造成的一切损失，其它事项双方协商解决或按？合同法？相关条款处理。
八：本协议一式两份，甲、乙双方各执一份，甲、乙双方代表签字、盖章生效。
1、 模具的表面不允许有影响模具使用及维修的划伤或碰凹处；凡质量超过25kg的 板必须做吊装孔；模具要求结构合理，产品脱模顺利；
2、 对于新委托加工模具的分供方，本公司规定第一次只能付预付款为模具总价的40%，后期付款方式待乙方第一批（副）模具加工出来之后视其模具加工的质量而定。对定向委托加工方按本协议第六条之规定付款；
3、 乙方必须按照严格甲方要求选用正确的模具材料，如果甲方发现乙方未经甲方同意擅自改动模具用料或者在模具材料选用方面以假乱真，甲方有权向乙方索取相应赔偿为该模具总价的1倍。乙方加工的模具的型芯及型腔、滑块等重要构件在试样合格以后均需氮化处理，同时乙方有必要在交付模具的时候附上重要构件的材料牌号证明及相关热处理说明；，
4、 甲方有权定期或不定期核实乙方的模具加工进度，当甲方在核实到实际情况认为乙方没有能力或未能按时按质完成本合同时甲方有权单方面终止合同，同时收回已付款项，并拥有向乙方索取相应赔偿的权利；乙方在正式加工模具前必须向甲方开列模具结构图，并做必要的说明，以便甲方进行可行性分析。
5、 乙方加工模具需严格按照gb4170—84？注塑模零件技术条件及附录？内容加工，模具验收时甲方要求
乙方提供加工该模具所用的电极（易损处日后维修用）； 乙方在正式交付模具之前须由甲方派工程师到乙方工厂现场试模（每模试样20模次以上），待试模件正式验证合格并经本公司相应工程技术人员签字确认后方可拉回本公司试模，经本公司（产品设计工程师、模具设计工程师、质量检测部）相关人员签字确认并经入库之后方可再付相应的二期模具款；
6、 在加工过程中，如乙方为达到甲方的要求需要改动产品结构时，必须提交相关的书面说明报知甲方，待甲方相关人员审核通过之后才能着手加工；
7、 一般情况下模具要求采用标准模架制作，模具加工完工后乙方须在模具的侧面（非工作表面或模脚）刻上该模具名称，文字线宽为3mm，深度为0。5mm左右；
8、 对于复杂模具的安装，乙方为甲方指导安装或提供相关说明；一般情况下模具的简单维修可由本公司模具车间员工进行，如遇不能解决或无法解决之维修情况，乙方有义务在接到甲方的维修要求电话或其他信息24小时以内到位着手维修，否则甲方将拒付相应模具款，同时乙方不能享受本公司定向委托方的相关条例所定之优惠条件。
9、 乙方必须对甲方提供的产品结构图及其它有关图纸保密，如发现因乙方泄露而导致甲方损失的，甲方有权照实际损失对乙方进行索赔；
10、本附件由双方代表签字、盖章后随合同一起生效。
注：以上价格含国家规定增值税，模具协作方在本公司按合同支付出相应款项后应开列相应的正式发票。
第3篇
经买卖双方友好协商,买方委托卖方加工生产____模具共______套。双方达成如下加工协议
产品名称序号零件名称穴数(模具类型)模具单价(rmb元)交货条件
1.买方负责交付给卖方本项目的研发进度要求及计划，并尽可能地提供项目的销售预测。
2.买方负责交付给卖方执行本合同所需的产品设计图纸和其他相关技术资料，并且负责技术方面的支持工作。
3.对交付给卖方的产品设计图纸和相关技术资料，买方具有唯一的解释权，当发生歧义时，卖方应征询买方意见，由买方确认。
4.卖方完成模具的设计和制造后，由买方去卖方现场对模具进行验证确认或由卖方提供产品样品到买方进行验证确认。本合同中所指模具包含产品本身的模具及后续生产所需的夹治具和模具。
1.卖方负责根据买方提供的产品设计图纸和其他相关技术资料进行模具的设计和制造，卖方
负责按照合同规定按时完成符合买方设计要求的模具。
2.卖方负责按时按量提供认证及样板测试、试产所需的产品。同时卖方必须提供相关产品的详
细的检验测试报告供买方确认。如需修/改模,送板时同时也要附检验测试报告(注明修改的
3.模具由买方认证合格后，由卖方负责模具的封存。如买方同意卖方进行产品的后续加工生产，则由卖方负责模具的修理和维护，卖方必须根据买方或买方授权的第三方的订单进行批量生产。
4.对给买方生产的所有模具，卖方应提供的详细的设计图纸给买方。所有的图纸必须以autocad或pro-eng(pro-el2)制作，并且必须在开模之前以电子档形式传给买方以供批准。
1.模具的修理和维护：在生产过程中模具的修理和维护由卖方负责;
2.在双方协商无异议之后，买方提供产品设计图纸及相关技术资料给卖方,并派工程人员同卖方进行技术交流或卖方派工程人员到买方进行技术交流，产品图纸及技术要求列表见附件1;
3.卖方承诺使用所承制的模具生产出的产品能够达到买方的品质要求
4.卖方承诺使用所承制的模具生产出的产品的产能能够达到卖方的交货要求：
5.卖方承诺本合同中所涉及的所有模具均能达到40万次。
6.未经买方允许,严禁卖方将本合同中所涉及的任何一付模具整体或部分外包给其它公司进行加工，否则视为违约，由卖方依本合同的违约条款承担违约责任。
1.1经双方协商后，由卖方提供买方认可的模具最终报价，并签订价格确认书，作为本合同不可缺少的一部分。
1.3模具价格总金额已包含如下费用，卖方不得以以下原因向买方要求费用：
1.3.1卖方对产品进行成型/二次加工/组装所需的所有夹具和治具的模具的费用;
1.3.2卖方按合同规定进行模具设计、试模所需的材料和设备及人工等费用;
1.3.3卖方提供给买方进行模具和产品认证的试模样品(800套)的费用;
1.3.4卖方为保证模具正常生产制作的模具易损备件的费用;
1.3.5卖方为保证产品正常生产所准备的其他工序的相关工具和治具的费用。
1.4当买方书面要求卖方根据产品设计的变更对模具进行修改时，如果模具修改较简单，包括从模具上减除模具材料的修改和其他简单修改，则卖方不需向买方收费;如果模具修改较复杂，对整个模具的结构影响很大，则由卖方根据修改模具所需工时向买方报价，由买方承担相应的模具修改费用。如果因为卖方的原因,因模具不能满足买方的要求而进行的修模或改模,买方不承担任何责任.
1.5由于卖方原因导致买方需要花费正常技术支持外的人工及费用，卖方应根据买方认可的方式给予相应的补偿。
2.1卖方在收到买方确认后的产品图档之后，即开始进入模具设计和制作阶段,开模周期为__25__天
2.3如果卖方模具制作出现工艺和其它的错误，导致模具无法验收合格而买方又急需生产，卖方应先用现有的模具安排生产，同时再根据图纸和样板要求免费重新开模。
3.1单独结算的方式：月结，开票后60天，开17%增值税发票.
3.1.1本合同制造整批模具的总金额(含增值税)为人民币_________元整(人民币________元整)，买方支付模具总金额的_____%，剩余___%模具费分
摊在首50k产品内，如果订单数量不足50k，买方需补给卖方未摊完的模具费。
3.1.2自双方合同签订后，卖方提供增值税发票(模具总额的___0%),买方在二十个工作日内支付。
4.产品定单：唯有产品样品品质验收合格且经买方书面确认后，卖方方可接受买方或买方授权的第三方的订单。买方授权的第三方同买方卖方签定的订购合同服从于本合同。
卖方在完成模具后，卖方同意按照买方品质标准以保证产品品质(首件确认报告).
买方对品质标准的内容根据实际需要保留修改的权利。
1.本合同所涉及的全部模具和夹治具及其组装图和零件图(包括2d和3d)的所有权，均归买方所有，卖方不得干涉买方对模具的处置权。如在卖方生产,由卖方负责保管,未经买方同意,卖方不得将此模具提供给第三者生产,否则买方有权要求卖方退还模具费并赔偿造成的损失.
2.买方付清模具款后，要求将模具从卖方处转出时，卖方必须配合买方或买方指定的第三方进行转移验收，并自行承担费用将磨损部件更换以保证重新开始生产。卖方有义务对模具进行组装、防锈和包装处理，并发运至买方指定的地点。所有模具的组装图和零件图(包括2d和3d)和所有夹治具必须同时转移给买方。
3.模具转移过程中，如因卖方不当组装、防锈或包装的原因，造成模具损坏，由此产生的所有直接损失和间接损失一律由卖方承担。
1.卖方保证模具使用寿命50万次,并在此期间内由卖方负责免费保养维修,如模具在使用寿命内不能使用,卖方应负责更换或重新开模,并承担相应的费用.
2.卖方应对模具的修改、维护和修理等情况及时登记造册，无论此种修改、维护和修理是否由
买方提出。如买方要询问有关的技术细节或证据，买方可以随时间登记，无需通知。卖方每三
个月应将登记记录复印一次给买方。卖方应主动定期完成此项任务，无需买方另行提出要求。
1.本合同所涉及的产品造型及买方提供的设计图纸和其他资料中所包含的知识产权为买方所拥有，未经买方许可，卖方不得向任何公司和个人泄漏，否则由此产生的一切损失由卖方负责;买方仅同意卖方基于本合同项下的目的使用买方所提供的一切资料和信息,
2.卖方同意其不会将买方所提供的设计图纸和其他资料或信息用于非本合同以外的其他目的,否则买方有权追究卖方相应的责任;未经买方书面许可，卖方不得在出版物，广告中或以其它书面、口头形式涉及卖方提供或已提供之任何资料和信息。
3.未经买方许可，严禁卖方使用本模具向除买方或买方指定的客户以外的其他客户供货，否则由此产生的一切直接损失和间接损失一律由卖方负责;
4.其它未尽保密事项，依买方与卖方签订的“保密协议”执行。
1.如果卖方方未能按2.1中规定的各阶段的进度完成模具制作及送样，由卖方承担违约责任。每延误一天，卖方须付给买方本合同总金额的2%作为罚金，罚金累计额最多不超过本合同模具总金额。
2.如果因为卖方的原因造成卖方提供给买方的产品的品质达不到买方的要求并且在组装过程中导致其他物料的损失和报废，卖方全额赔偿损失和报废的物料及因此形成的人工/停线费用。双方可另行签署生产用原材料/零部件采购合同进行约定。
3.如果因为卖方的原因造成卖方提供给买方的产品的品质和进度达不到买方的要求，使买方及其客户错过了产品上市的最佳时机，或者买方被迫因此取消此项目，从而使买方及其客户遭受严重的研发损失和备料损失，则卖方除退还所有前期买方所支付的货款外，视实际情况卖方另外承担买方直接及间接的经济损失。
4.如卖方因为不可抗拒力(包括战争、火灾、罢工和中国法律规定的其他不可抗拒力造成的供货延迟，买方允许买方免责。卖方应在不可抗拒力发生后24小时内以)书面形式通知买方，并且卖方仍有义务采取一切必要措施尽快交货。若不可抗拒力持续2周以上，买方有权取消本合同。
对于实施本合同而发生的任何争议,双方首先通过友好协商解决,如在30天内协商不成,任何一方均可将争议提交xx市法院处理.
本合同双方须严格执行,如一方因故不能履行合同,必须提前两周征得对方同意,方可终止本合同。
第4篇
为了增强甲乙双方的责任感，加强经济核算，提高经济效益，确保双方实现各自的经济目的，经甲乙双方充分协商，特订立本合同，以便共同遵守。
1、模具的名称：按照每次《模具外协加工单》标注的名称；
3、模具的技术标准（包括质量要求），按下列第（ ）项执行：
（２）无国家标准而有部颁标准的，按部颁标准执行；
（４）没有上述标准的，或虽有上述标准，但需方有特殊要求的，按甲乙双方在合同中商定的技术条件、样品或补充的技术要求（如>）执行。 第二条 模具的包装标准：
1、交货方法：乙方按照双方约定的日期送货到甲方工厂，费用由乙方自行负责。
3、到货地点和接货单位（或接货人）＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿。
2、模具货款的结算：模具交付甲方，待验收合格后，甲方在本月月底支付已方模具费。
第五条 甲方向乙方提供模具图纸及该图纸的电子文档（如附件）。
第六条 模具的工艺要求：模具图纸、模具外协加工单如附件。
1、乙方到期不能交货，应向甲方偿付总货款的30％的违约金。
2、乙方所交模具品种、型号、规格、花色、质量不符合合同规定的，如果甲方同意利用，应当按质论价；如果甲方不能利用的，应根据模具的具体情况，由乙方负责包换或包修，并承担修理、调换或退货而支付的实际费用。乙方不能修理或者不能调换的，按不能交货处理。
3、乙方因模具包装不符合合同规定，必须返修或重新包装的，乙方应负责返修或重新包装，并承担支付的费用。甲方不要求返修或重新包装而要求赔偿损失的，乙方应当偿付甲方该不合格包装物低于合格包装物的价值部分。因包装不符合规定造成货物损坏或灭失的，乙方应当负责赔偿。
4、乙方逾期交货的，向甲方偿付逾期交货的违约金，并承担甲方因此所受的损失费用。
1、甲方中途退货，应向乙方偿付退货部分货款30％的违约金。
2、甲方逾期付款的，应按照中国人民银行有关延期付款的规定向乙方偿付逾期付款的违约金。
3、甲方违反合同规定拒绝接货的，应当承担由此造成的损失。
4、甲方如错填到货地点或接货人，或对乙方提出错误异议，应承担乙方因此所受的损失。
甲乙双方的任何一方由于不可抗力的原因不能履行合同时，应及时向对方通报不能履行或不能完全履行的理由，在取得有关主管机关证明以后，双方另行协商履行期限，并根据情况可部分或全部免予承担违约责任。
第十一条 如甲方因生产需要，要求增加该模具数量，其价格另议。
第十二条 解决合同纠纷的方式：甲乙双方如果发生争议，应当友好协商解决。如协商不成，任何一方均有权将争议提交北京仲裁委员会。按照提交仲裁时该会现行有效的仲裁规则进行仲裁，仲裁裁决是终局的，对甲乙双方均有约束力。
第十三条 双方本着诚原则签定本合同，若有未尽事宜，须双方另行协商解决，作出补充规定，补充规定与本合同具有同等效力。
购货单位（甲方）：（公章） 供货单位（乙方）（公章）
